Festo launches MS-Basic, a family of pneumatic service units in polymer housings that offer attractively priced components covering most application needs. MS-Basic air preparation components have the functionality to perform the most important technical tasks necessary for proper compressed air preparation and consist of pressure regulators, filter regulators, electric on/off and soft start valves, as […]

Follow these five steps to prevent tampering and ensure effective and correct process adjustments for pneumatic components. Steve Bain, Industry Segment Manager – Food and Beverage, Festo North America In modern automation systems, the need for frequent process adjustments poses the risk of unwanted device tampering, often referred to in exasperation by plant managers as Unnecessary […]

With the recent introduction of its distributed I/O solution CPX-AP-A, along with its established CPX-AP-I decentralized I/O, Festo now offers a range of electric and pneumatic automation solutions that is unmatched in North America in terms of performance, flexibility, cost savings, and engineering productivity. AP stands for Automation Platform, and this backplane-based remote I/O system […]

Festo now offers CPX valve manifold configuration to Emerson DeltaV DCS systems for fast, simple, and effective programming, commissioning, and validation of Festo-based pneumatics for skids and machines. This first-of-its-kind third-party commissioning solution brings one of the world’s most versatile valve manifold control platforms, CPX, to the DeltaV DCS ecosystem. Fast commissioning enables system integrators […]

Digitalization is changing the way people learn, and not just because in-person learning became so difficult with pandemic lockdowns. Trends such as mobile, micro, adaptive, and virtual reality learning were already beginning to exert an influence in technical education and training. To further these and other trends, Festo Didactic developed a digital learning portal – […]

Festo continues to enable original equipment manufacturers (OEMs) to lower engineering and purchasing overhead and bring machines to market faster with the company’s new online 3D CAD Configurator for pneumatic actuators and associated accessories such as fittings, lengths of tubing, and sensors. The tool is intuitive and easy to use. Once the actuator is selected […]

Festo adds a new space-optimized product to its line of pneumatic cylinders ‒ the ultra-compact ADN-S – for performing small movements in tight quarters and, in so doing, helping machine designers keep their projects as space-efficient as possible. Festo took the ISO standard ADN double-acting cylinder and shrank the housing length to create a significantly […]

Last week, Festo Didactic Learning Systems North America and its partners gathered to announce new plans for the Mechatronics Apprenticeship Program (MAP) at its Regional Service Center (RSC) in Mason, Ohio. Industry, education, and government came together to strengthen workforce development for Industry 4.0 careers. Guest speakers included representatives from the Lt. Governor’s office and…

These tips not only adhere to food safety guidelines, but also serve to improve machine utilization and performance. By Steve Bain, Food and Beverage Industry Segment Manager, Festo Before describing the four pneumatic automation design tips for food and beverage packaging applications, it is a good idea to answer a fundamental question: Why apply pneumatic […]

Festo U.S., celebrating its 50th anniversary year, announces expansion plans for its 47-acre campus in Mason, Ohio. A new production facility and the expanded research and development center will be dedicated to U.S.-centric automation components, systems, and solutions. Festo, a $3 billion family-owned company, is a global innovation leader in pneumatic and electric automation systems. […]

What if there was a robot that was easy to operate, did not require a safety fence and was also attractively priced? That would introduce a whole new era in human-robot collaboration. This new era is now dawning – with the world’s first pneumatic robot from Festo, which was announced by Festo at Hannover Fair […]

Festo announces that PennAir, with corporate headquarters in York, Pennsylvania, now sells and supports the full range of Festo pneumatic and electric automation components and systems in Pennsylvania, New Jersey, Maryland, Delaware, Virginia, and West Virginia. According to Mark Snyder, Channel Director Festo Corp., “One of the most impressive things about PennAir is its holistic […]

Festo’s PM aluminum pneumatic tubing offers a weld-spatter resistant solution in welding cells that by every consideration outperforms both laminated and steel pneumatic tubing. Festo PM tubing is ideal for new welding cells as well as for cost-and-time efficient retrofit solutions for existing systems. PM aluminum tubing can be located closer to the welding process […]

Festo introduces the SDBT-MSX – the first programmable proximity switch with automatic switching point setting. With an initial detection range of 20 mm, the SDBT-MSX is easy and reliable to install and commission, especially in applications where mounting is difficult. The switch is ideal for all standard applications, including factory automation and the electronics industry/small […]

Festo introduces the rugged, versatile, and economical DSNB actuator for NFPA mounting applications. The DSNB is ideal for sorting, stacking, insertion, loading, lifting, dispensing, clamping, and gate applications on converting machines. Customers can order the DSNB in 7 bore sizes, 11 variations, and 15 different NFPA mounting configurations, offering maximum flexibility and the advantage of […]

The new DSNU-S round cylinder is the latest response from Festo to the need of machine designers for smaller versions of standard components so they can shrink the footprint of their machines or production lines accordingly. The DSNU-S, part of Festo’s core product range of always-in-stock components, is up to 40% slimmer, 35 mm shorter, […]

Festo recently introduced VPPI, a new family of proportional pressure regulators. Highly dynamic to 30 Hz, VPPI offers precise and stable operation in vacuum applications as well as tasks up to a pressure range of 12 bar. Coupled with an IO-Link interface as well as a fieldbus connection for controlling the valves via a Festo […]

The new Festo KVZA Butterfly-Valve Configurator lowers overhead by speeding up and simplifying procurement of manual and automated butterfly valves. In only minutes with the configurator, engineers will have the price, estimated delivery date, data sheet, bill of material, 2D CAD data, 3D CAD models, and certificates of the optimum butterfly valve for the application. […]

Festo SE & Co. KG was awarded the Golden Catalog Seal by CADENAS GmbH for its comprehensive digital 3D CAD product catalog. Festo has been successfully using the digital product catalog based on the eCATALOGsolutions technology from CADENAS for many years, creating the basis for digital twins of its products. The Festo product catalog fulfills […]

Festo recently introduced the manually operated VHEF and the mechanically operated VMEF pneumatic valves. These small, durable, and versatile valves are core Festo products and guaranteed to ship within 24 hours. Whether the valve is triggered by a workpiece, a component, or a person, manual and mechanical valves are the most direct way to control […]

Last year when it became clear that in-person trade shows were not possible, Festo built its own stand for organizing virtual exhibitions and virtual customer meetings. “One of the most valuable exhibits is the Productivity Master, which helps customers deal with the global challenges of today,” said company spokesman Christopher Haug. It will be at […]

Diamond cutting is a task for human beings. The cutting must be carried out by a perfectly trained specialist, because — no matter how flawless the gemstones may be — an incorrectly placed cut will ruin everything. Even with perfect color and purity, the wrong cut can significantly reduce the value, which is why good […]

Festo has expanded its intelligent pneumatic energy savings platform beyond the MSE6-E2M (E2M) with two new modules — the MSE6-C2M (C2M) and the MSE6-D2M (D2M). These modules can pay for themselves in less than a year with the energy savings accrued. The platform provides actionable information that supports quality production. The modules in this platform […]

Festo introduces to Rockwell Automation customers at Automation Fair, November 16-20, a unique pneumatic valve manifold that enables up to Performance Level (PL)-d Category 3 safety through an integrated serial bus backplane for pneumatics. The “C-Bus” plug-and-play integration simplifies, speeds up, and lowers component costs when installing pneumatic safety circuits, which are specifically for safe […]

The new Festo KVZB Ball-Valve Configurator speeds up and simplifies the ordering process for the optimum ball valve assembly. KVZB assemblies start with a stainless steel two- or three-way ball valve and can be as simple as having a hand-lever or built up to a fully automated package. The online configuration process supplies price, estimated […]