Parker Hannifin showcased a variety of technologies at IFPE 2023. The booth featured new and evolved products in their smart electrification technology portfolio aimed at enabling battery-powered machines. Though Parker is known for hydraulics, the company has been creating electric components and integrating hydraulics into electric systems for almost 40 years. At IFPE, Parker displayed…

Ergonomics, safety, efficiency, and refined quality are key themes for hydraulic hose applications these days. Machine builders are looking for hoses that improve service life and fit their exact specifications. Therefore, manufacturers are designing more durable and flexible hose solutions for heavy-duty mobile machines and evolving electro-hydraulic systems. “A hose’s working pressure, flexibility, and lifetime […]

By Shaun Skilton, Product Manager; Andrew Baldwin, Engineering Manager; and Marc Williams, IoT Market Sales Manager, Parker Hannifin Industry statistics show that a whopping 80% of hydraulic system failures are due to contamination. In many of these cases, undetected contaminants of various forms have clogged, blocked, or otherwise damaged fragile hydraulic system components. The result […]

The Electronic Motion & Controls Division (EMC) of Parker Hannifin has released IQAN-G12, a CAN gateway module that uses Bluetooth wireless technology for IQAN system diagnostics on-site or remotely. The new IQAN-G12 offers a faster download speed, increased connectivity range and greater security than the predecessor module it replaces, the IQAN-G11, making it easier, quicker […]

Parker Hannifin Corp. announced that its Board of Directors has elected Jennifer A. Parmentier as Chief Executive Officer and Andrew D. Ross as Chief Operating Officer, each effective January 1, 2023. Parker also announced that its Board approved, effective January 1, an increase in the size of the Board from twelve to thirteen Directors and…

Hybrid systems bridge the road to electrification with small batteries and readily available components. Electrification aims to eliminate vehicle emissions that degrade air quality and negatively impact public health. From a technical standpoint, electrification makes sense for light- and medium-duty vehicles, such as cars and small construction equipment. However, electrification is more complex for larger […]

Parker Hannifin has introduced a new safety block (SB series) for hydraulic accumulators that simplifies the selection, installation and maintenance process of these important system components. Due to the broad variety of accumulator types and their applications, the market is proliferated with an equally wide expanse of safety blocks that, until now, has made selection…

At MinExpo last fall, Parker Hannifin’s Hydraulic Pump and Power Systems Division released a complete electrification system spotlighting its new GVM310 global vehicle motor and P1M series mobile open-circuit, medium-pressure axial-piston pump. The GVM310 is a powerful, rugged, electric vehicle motor for both heavy on and off-road vehicles, engineered for traction and electrohydraulic pumps (EHP) […]

Parker Hannifin has launched the new optimized FEM Quick Coupling Series which offers an increased working pressure up to 350 bar and a decreased pressure drop for better flow properties. The revised and updated FEM and FEC series have profiles corresponding to ISO 16028 and exceed the technical requirements in the ISO 16028 specifications. They […]

The Hydraulic Pump and Power Systems Division of Parker Hannifin Corp., highlighted the Pump & Motor Division Europe’s new Series V16 motor at MINExpo earlier in the fall. Series V16 is a new generation of variable displacement, bent-axis motors and a further development of Parker’s V12 and V14 bent axis motor series. The Series V16 […]

Parker Hannifin Corp. is expanding its global aerospace and defense motion and control reach with an all-cash acquisition of Meggitt a UK-based manufacturer. The deal will nearly double Parker’s aerospace business. Meggitt, headquartered in Coventry, the UK, had annual revenue of approximately $2.3 billion in 2020 and employs more than 9,000 team members serving customers…

Parker Hannifin has announced that its mechanical flange system for machines and plants (with working pressures of up to 420 bar) — “HPF – Parker High Performance Flange System” — has gained DNV GL approval for marine applications. The DGUV approval certifies the use of Parker’s HPF in hydraulic systems for injection moulding machinery as […]

Contributed by Mike Giammo, product sales manager, and Mitch Eichler, business development manager, Parker’s Hydraulic Valve Div. Parker Colorflow valves have been a global standard in industrial and mobile applications for more than 60 years. The exclusive colored rings found on metering, flow control and needle valves provide users highly visible checkpoints that allow for […]

Using non-welded flange systems, such as Parker’s High Performance Flange connectors, reduces errors and saves hours on installation in mission-critical marine applications. Hydraulic high-pressure connections in the marine market must withstand harsh conditions, vibrations and other environmental impacts. Traditional welded connections do not always withstand these rigorous demands, and often require time-consuming and costly post-welding pipe […]

In our recent story, “Basics of static sealing,” Thomas Braun and Christoph Meissner with the Prädifa Technology Div. of Parker Hannifin’s Engineered Materials Group discussed the fundamentals of O-rings and back-up rings. And while rubber O-rings are probably the most common type of static seal, they indicated there are numerous other options design engineers should […]

Static sealing elements are used practically everywhere in daily life, although they typically go unseen. And while sealing technology expertise is limited to a relatively small group of specialists, mechanical and fluid-power engineers must be able to apply the fundamentals to ensure successful designs. In a recent webinar, “Sealing Solutions for Static Applications,“ Thomas Braun […]

Parker Hannifin’s Pneumatic Division, as part of its global focus on factory automation, announced the release of a revolutionary network portal, The PCH Network Portal. The PCH Network Portal provides the opportunity to minimize machine costs, shorten start-up time and offers built in features to help reduce end user downtime in factory environments. The PCH […]

Parker Hannifin has expanded its flat-face couplings offering with the SCFF series. This series of couplings offers users a number of benefits ranging from low-leakage decoupling to the avoidance of air entrapment during coupling. The couplings, which are tested in accordance with ISO 7241-2, are easy to clean and very flat. Whether being used in mobile […]

Parker Hannifin has launched a mobile directional control valve that can be used in a steer-by-wire system for earth-moving equipment and other types of mobile machinery. This high-performance single fault tolerant valve is designed to support the ongoing evolution and trend for electrification of vehicles in this market. Over the years, orbitrol steering has become […]

This article first appeared in print as a two-part series on simulation in an economic downtown. Part 1 appeared in the October issue of Fluid Power World. Contributed by Bipin Kashid, Simulation Engineer and Mitch Eichler, Applications Engineer, Parker Hannifin Hydraulic Valve Division Economic slowdowns can hurt new business through tightening budgets, order reductions or losses and…

Winners of the LEAP Awards have been announced for the second annual awards competition. In the Pneumatics category, Festo took the gold for its DHEF adaptive shape gripper, which adapts to workpiece size and shape and picks up, gathers, and sets down single or multiple objects without manual adjustment. The new DHEF adaptive shape gripper from Festo […]

CLEVELAND, November 5, 2019 — Winners in the second annual LEAP Awards, celebrating the best components and services across the mechanical and electrical engineering design space, were unveiled today. Across 13 categories, the judging panel awarded Gold, Silver and Bronze recognitions, as well as Honorable Mentions for certain submissions. The awards program is supported by…

At the close of the Fluid Power Technology Conference at Cleveland State University November 20, attendees can choose to attend a short tour of the Parker Hannifin Motion Control Laboratory for Fluid Power Systems on campus. The lab seeks to provide students with the skills needed to innovate, design and build the motion control systems…

One of the new product highlights at ICUEE this week from the Hydraulic Pump and Power Systems Division of Parker Hannifin Corp., was its new PC3, a variable displacement axial piston pump designed to excel in medium duty applications. The PC3 was launched earlier this year. This high performing, robust compact solution was built to […]

Pulsed air blow systems can provide cost-saving alternatives to continually blowing compressed air in bottling and packaging applications. Contributed by Alex Bakos, Product Sales Manager – controls Parker Hannifin’s Pneumatic Division As many companies continue to strive toward reducing operating costs, energy consumption is a key area where new technologies can improve the bottom line. […]