By Ron Marshall, Contributing Editor Sanjay had spent years walking the production floor listening for compressed air leaks. Like most maintenance supervisors, he knew the sound well, the constant hiss behind a machine, the loose fitting someone forgot to tighten, the cracked hose that operators learned to ignore. But one afternoon during an energy review,…
Compressed air fail: The forgotten compressed air energy users
By Ron Marshall Marcus, the maintenance technician, thought he had finally solved one of the plant’s biggest compressed-air problems. Over the previous several months, his team had worked steadily through a leak-repair program, tagging leaks, repairing fittings, replacing damaged hoses, and following up with ultrasonic checks. The results were obvious during production. Compressor loading dropped, […]
What your compressed-air system may be costing you
By Dave Henning, Business Development Manager, Motion and Control Enterprises Plant managers track labor costs, monitor production output, and scrutinize energy bills and maintenance budgets. But one of the most expensive utilities in many manufacturing facilities often receives far less attention: compressed air. For decades, compressed air has been known as the “fourth utility” because […]
The audit that prevented a shutdown
By Ron Marshall When Mark, the maintenance manager at a busy manufacturing plant, approved a compressed air audit, he expected the usual findings. He assumed the auditor would identify leaks, recommend a lower operating pressure, and calculate the annual electricity savings. Energy costs mattered, but they were not Mark’s greatest concern. A critical production line […]
Rid yourself of remote frustration with connected monitoring
By Ron Marshall, Contributing Editor I have spent more than two decades traveling from plant to plant performing compressed air audits, and over the years I’ve learned one frustrating truth: sometimes the hardest part of an audit was not diagnosing the system but simply getting good data. Like many compressed air auditors, I have driven […]
Compressed air fail: The pressure drop that wasn’t a filter problem
By Ron Marshall Jeff had been a maintenance technician long enough to know that low-pressure complaints rarely arrived alone. When one operator reported sluggish pneumatic cylinders, others usually followed with complaints about weak air tools, slow actuators, and inconsistent machine performance. That was exactly what happened one Monday morning in the assembly area, where production […]
Plant engineer learns why compressed air drying matters
By Ron Marshall, Contributing Editor Fred had been the plant engineer at the packaging facility for nearly ten years, and he thought he understood his compressed air system well. The compressors ran, the machines worked most of the time, and whenever there was a moisture problem someone usually changed a filter or drained a receiver […]
Compressed air fail: The water problem that started at the cooling air intake
By Ron Marshall When Sarah’s phone rang for the third time that week about water in the compressed air system, she assumed she already knew where the problem was. The maintenance supervisor reported water collecting in filter bowls, operators complained that pneumatic cylinders were becoming sluggish, and one production line had experienced quality problems because […]
Every compressed air audit should start with a block diagram
By Ron Marshall When engineers begin a compressed air audit, there is often a strong temptation to install instruments immediately. Pressure loggers are connected, power meters are hooked up, flowmeters are positioned, and data begins accumulating. It feels productive, but there is a risk: if you do not first understand how the compressed air system […]
Compressed air fail: Look for your numbers
By Ron Marshall Mike had walked past his compressors thousands of times. Two rotary screw compressors were installed in the corner of the plant, humming away just as they always had. He knew how to start them, how to stop them, and who to call when something didn’t sound right. Beyond that, the control panel […]
Your compressor may not be the problem — but your data might be!
By Ron Marshall When a compressed air system struggles, the compressor usually gets blamed first. Pressure is dropping at the far end of the plant. Production tools are slowing down. Another compressor is running more often than expected. The energy bill is climbing. The first reaction of management is often predictable: “We need a bigger […]
Is your compressor room like a sauna?
Contributed by Ron Marshall Richard, the maintenance manager at a plant that manufactures powdered coatings, was used to dealing with heat. The curing ovens in the facility ran hot, and summer months always made the production floor uncomfortable. But one area of the plant seemed especially unbearable — the compressor room. Every time Richard stepped […]
Compressed air fail: The 40-kW wake-up call
By Ron Marshall George ran the compressed air system at his plant for eleven years. If you would have asked him last spring how it was doing, he’d have shrugged and said, “Fine.” Two screw compressors, sharing the load, humming along the way they always had. Nobody calls a meeting about compressed air until something […]
Is your air dryer quietly wasting energy?
Mark had always considered himself a capable plant manager. He knew his way around the facility, understood the production demands, and trusted his maintenance team to keep things running. As far as he was concerned, the compressed air system was doing its job. The air was dry, production wasn’t complaining, and the compressors were humming […]
Stop the silent thief: Save money with compressed air efficiency
Walk through almost any manufacturing plant and you’ll hear it, the steady hum of compressors, the hiss of air tools, the pulse of production. To many, it sounds like business as usual. But to someone who understands compressed air systems, that same sound can also mean one thing: Money leaking away! Compressed air is often […]
Are you paying something for nothing? Check your compressor control!
By Ron Marshall In many industrial plants, the real cost of compressed air isn’t just the air being used on the production floor, it’s the energy consumed when the compressor is running — but not producing useful air. Choosing the wrong operating mode for your compressor can be surprisingly expensive. It’s a bit like sitting […]
The mystery of the vanishing pressure: A survival guide
Joe stood in the middle of his plant, watching a critical machine sputter to a halt. His operator pointed at the gauge, which read 25 psi lower than the compressor’s display in the back room. To fix it, Joe did what most managers do: he bumped up the discharge pressure at the source. This boosted […]
Compressed air fail: Flow meter surprise
Greg had been the maintenance engineer at the manufacturing plant for nearly 10 years. He knew every pump, conveyor, and compressor in the facility. When something went wrong, people called him. But compressed air had always been a bit of a mystery. The system seemed to run fine. The compressors started, pressure stayed stable, and […]
Lower compressor energy consumption with low-cost machine adjustments
These changes can unlock plant-wide air savings, avoid major capital investment, and improve carbon footprint. By Steve Bain, Industry Segment Manager, Food and Packaging, Festo Compressed air is one of manufacturing’s largest energy expenses, and most plants run it far above what their machines actually require. By tuning machines that use excess compressed air rather than […]
Atlas Copco introduces DHS 3000 VSD+ vacuum pump
Atlas Copco developed the dry screw vacuum pump DHS 3000 VSD+ for high-flow industrial applications. The pump is intended for paper processing, conveying, pick-and-place applications in the food industry, and central vacuum systems. It uses an IE4 motor and an asymmetrical rotor design. Atlas Copco said users can see energy savings of up to 50% […]
Is your compressed air system out of tune?
By Ron Marshall Remember when your compressed air system was new? The compressors and dryers were shiny, the installation was perfect, and everything was finely tuned for optimal performance. But time takes its toll. Components wear out, sensors fail, and well-meaning adjustments can knock the entire system out of harmony, quietly costing you a fortune […]
Maintaining peak compressed air efficiency
By Ron Marshall When Lisa first took over as plant engineer at a food processing facility, she inherited a compressed air system that seemed to run well enough — or so everyone thought. The compressors were tucked away in a room at the far end of the plant, and as long as production lines kept […]
How this steel plant saved thousands on compressed air
By Ron Marshall The steel plant had been running its compressors at 120 psi for as long as anyone could remember. The air system was powerful and reliable, or so it seemed. But when energy costs started climbing, management called in a compressed air auditor to see if there were hidden savings. When the auditor […]
12 common compressed air misconceptions
When it comes to compressed air efficiency, misunderstandings are everywhere. Many plants operate under assumptions that lead to wasted energy, higher costs, and reduced reliability. Correcting these misconceptions can improve both performance and the bottom line. Here are some of the most common myths — and the reality behind them. Compressed air is free once […]
Can hydraulics and pneumatics get along together in automation?
Combining air and oil on modern automation machinery helps to balance force, speed, precision, reliability, and cost. I know what you’re thinking – “forget it, just use electronic components for automation instead of hydraulics or pneumatics.” Well, you can put the brakes on that idea, fella, because this is Fluid Power World, and I pushed…























